The move from 25° C to 27° C (77° F to 80.6° F) can have a negative impact on the IT equipment’s power dissipation. Most IT manufacturers start to increase air -moving device speed around 23° C (73° F) to improve component cooling and offset the increased ambient air temperature. Increases in the server intake temperature from 23° to 27°C will double the server fan energy consumption. A typical server fan consumes 10 percent of the total server energy at low temperatures. 

This small change in input temperature to 27°C (80.6°F) will increase the total server energy by 10 percent. A move to 29°C (84.2°F) increases the total server energy by 20 percent.

Data center energy costs as a percent of total revenue are at an all time high. Energy costs are becoming the second highest operating cost in IT organizations, behind labor. A typical one-megawatt data center consumes 16 million kilowatt-hours of electricity a year.

It will be interesting to see if the new ASHRAE recommended environmental range changes operational expenditures and total cost of ownership.

December 2009 – Featured Test Equipment

!! Everything we sell at BIZI is fully tested and comes with a standard warranty!

We stand behind what we sell!

Agilent 37719A – Telecom Analyzer

BIZI Price: $6,000

OmniBER 719A Communications Performance Analyzer

Call Today! 1-800-370-0123
or

Agilent 8592B – Spectrum Analyzer

BIZI Price: $5,500

9kHz-22GHz MW Portable Spectrum Analyzer, remote programmable.

Call Today! 1-800-370-0123
or

Ando AQ6331 – Spectrum Analyzer

BIZI Price: $10,000

Portable Optical Spectrum Analyzer.

Call Today! 1-800-370-0123
or

Anritsu MG3694A – Pulse Generator

BIZI Price: $20,000

Synthesized CW Generator.

Call Today! 1-800-370-0123
or

Fluke DSP4300 – Digital Cable Analyzer

BIZI Price: $3,995

Digital Cable Analyzer.

Call Today! 1-800-370-0123
or

IXIA LM100TX – Network Analyzer

BIZI Price: $900

4-Port Multilayer 10/100Mbps TX Ethernet Load Module.

Call Today! 1-800-370-0123
or

LeCroy WP7300 – Digital Oscilloscope

BIZI Price: $20,000

3GHz 4-Channel Digital Oscilloscope, 20Gs/s, 10.4″ color display, 150ps rising time, analogic persistence, X-Stream technology, 3″1/2 FDD, GPIB.

Call Today! 1-800-370-0123
or

Noisecom UFX7109 – Signal Generator

BIZI Price: $2,250

100Hz-1GHz Programmable Multi-Purpose Noise Generator.

Call Today! 1-800-370-0123
or

Sumitomo Type-65M24 – 24-Fiber Fusion Splicer

BIZI Price: $25,000

24-Fiber Mass Optical Fiber Fusion Splicer, 5.6in. Color LCD Monitor Display, Lower Power Consumption, Automatic Splice and Loss Estimation.

Call Today! 1-800-370-0123
or

Tektronix TDS7104 – Digital Oscilloscope

BIZI Price: $7,000

1-GHz, 4-Channel, 10-GS/s, Digital Phosphor Oscilloscope.

Call Today! 1-800-370-0123
or

Acterna / JDSU FST-2802 – Test Pad

BIZI Price: $6,000.00 – (Used / Refurbished) in Excellent Condition!

Acterna / JDSU FST-2802 – Test Pad
Ethernet and Fibre Channel services module.

The Acterna / JDSU FST-2802 allows the technician the ability to setup multiple services with just one test pad!

This Unit Includes the Following Installed Options:

• FST-2000: Networking Option
• FST-2802: Ethernet and VLAN

This Unit Includes the Following Accessories:

• RFC2544 Script PCMCIA Card
• Cisco ONS-GC-GE-LX GBIC
• AC Adapter
• Carrying Case
• Hard Copy Manual

From the Manufacturer:

The JDSU FST-2802 is a handheld Ethernet, Fibre Channel, and IP services test instrument designed to meet the needs of service providers for turning up and troubleshooting these various services. The JDSU FST-2802 enables technicians to use one test set to turn up services ranging from 10/100 Ethernet, Gigabit Ethernet, Fibre Channel, and IP – all from a single TestPad module!

Features:

• Full line rate traffic generation with variable traffic load characteristics to stress test 10/100/1000 Mbps Ethernet interfaces.
• Ability to test 1.0625 and 2.125 Gbps Fibre Channel services at 100% wire speed.
• IP ping and traceroute testing for verification of network connectivity.
• Ability to perform IP throughput verification and round trip delay testing.
• Filtering capabilities at L2 and L3 enable users to perform circuit troubleshooting.
• Dual-port capability for Ethernet and Fibre Channel traffic generation.
• BER testing at layer 1 and layer 2 for Ethernet and Fibre Channel circuits.
• Loopback frame generation to automatically loop the far-end test at L2 and L3.
• Remote graphical user interface (GUI) application for remote testing via an analog modem, Ethernet LAN, 802.11, or Bluetooth.

This Acterna / JDSU FST-2802 is in Excellent Condition, the pictures provided above are of the actual unit.

Call Today! 1-800-370-0123! or visit our Acterna / JDSU FST-2802 Test Pad product page on www.BiziTestEquipment.com.

You may also leave us a comment on this post and a BIZI representative with contact you promptly.

Looking for a different Acterna Network Analyzer model? Call or visit http://www.bizitestequipment.com.

Thanks for viewing this post and check back often!

Sumitomo Electric TYPE-65M24 – 24 Fiber Mass Fusion Splicer

BIZI Price: $25,000.00 – (Used / Refurbished) in Excellent Condition!

Sumitomo TYPE-65M24 – 24 Fiber Mass Fusion Splicer
** The Type-65M24 can be used for all types of ribbon and single fiber splicing.

We have quantity 2 of these units in-stock while they last! One has 175 Arcs and the other 275 Arcs!

The Sumitomo TYPE-65M24 – 24 Fiber Mass Fusion Splicer is the latest and greatest fusion splicer available today!

These Units Include the Following Accessories:

• Hard Case, Manual, Power Adapter and Cords
• BU-65 Battery Pack
• PS-65: AC Adapter/Battery Charger w/Charger Cord
• FC-6M24: Fiber Cleaver
• JR-5M24: Hot Jacket Remover
• Single Fiber Holder, Fiber Chuck (025um)
• RHS-12: 12 Fiber Holder, Fiber Chuck
• SS50-24: 24 Fiber Holder, Fiber Chuck

From the Manufacturer:

The Type-65M24 sets a new standard for productivity for high fiber count applications. With its’ reduced size and weight it is also designed for complete portability. With 30 mph wind protection and a compact size, it can splice in any environment. Utilizing precision v-groove alignment, the Type-65M24 can be used for all types of ribbon and single splicing with an optimum arrangement for ease of use in aerial and taut-sheath applications.

Features:

• Compact, Lightweight Design and Front to Back Work Flow System
• Simultaneous Focusing on Up to 24 Fibers at a Time
• 5.6” Color LCD Monitor Display with On-Screen Guide
• Lower Power Consumption With Built-In Power Management
• Automatic Splice and Loss Estimation In Less Than 50 Seconds for 24-Fiber Ribbon

This Sumitomo TYPE-65M24 – 24 Fiber Mass Fusion Splicer is in Excellent Condition, the pictures provided above are of the actual unit. We have 2 units in stock one has 175 arcs and the other has 275 arcs, they’re practically unused and you save more the $7,000 off of new price!

Call Today! 1-800-370-0123! or visit our Sumitomo TYPE-65M24 Fusion Splicer product page on www.BiziTestEquipment.com.

You may also leave us a comment on this post and a BIZI representative with contact you promptly.

Looking for a different optical fiber fusion splicer model? Call or visit http://www.bizitestequipment.com.

Thanks for viewing this post and check back often!

At 300 feet, 802.11g performance plummets to 1Mbps. 802.11n networks operate at up to 70Mbps—70 times faster than 802.11g. Add some enterprise Access Points (AP), the range can grow well beyond the 300 ft. The key to this speed is MIMO (multiple input/multiple output) which uses multiple antennas to send and receive digital data in multiple simultaneous radio streams, thus multiplying total performance..

802.11n runs on the 5GHz spectrum, which is beneficial because there are fewer devices in that spectrum. By comparison, 802.11b and g run at 2.4GHz. Many organizations have had to move from b and g just to avoid interference with microwave ovens, cordless phones, Bluetooth, etc. Many environments were too noisy yielding too much interference, groups had to change technology – to 802.11a, which also runs on 5GHz spectrum – to fix their issues. 802.11a runs on the 5GHz spectrum while b and g runs at 2.4GHz. 802.11n also runs on 2.4 and 5, so there’s backward compatibility. Prior, 802.11a was not backwards compatible with b or g. If your organization is invested in either spectrum, you have an option to start upgrading to n.

802.11n is backwards compatible with prior 802.11 standards (802.11b, 802.11g) and is designed to accommodate future technology changes.

802.11n automatically detects the network type on the other end of the connection and instantly adjusts the speed of the conversation to match it, making it compatible with older 802.11b and 802.11g devices.

Network Security:

802.11n uses WPA and WPA2 to secure the network. WPA2, or Wi-Fi protected access, authenticates computers on a Wi-Fi network and provides a complex algorithm for encrypting communication. 802.11n products using SecureEasySetup make activating security as simple as pushing a button. That’s all that’s required to establish a strong, hard-to-crack WPA or WPA2 security key that locks down your network, ensuring the privacy of all communications.

Standards are written and approved by committees made up of professionals from the industry that the standards affect, and these committees generally have representation from manufacturers, government, universities, and independent consultants who have a key interest in the manner that products and services are delivered.

Within customer premises, the importance of the cabling infrastructure is similar to that of other fundamental building utilities such as heating, lighting and mains power. As with other utilities, interruptions to service can have a serious impact. Poor quality of service due to lack of design foresight, use of inappropriate components, incorrect installation, poor administration or inadequate support can threaten an organization’s effectiveness.

Standards are not mandatory and have no inherent jurisdiction over the products or systems that they cover, and may be voluntarily adopted by manufacturing and service organizations to make their product or service more attractive to the end user.

Fujikura FSM-40S Optical Fiber Fusion Splicer

BIZI Price: $6,449.95 (Used / Refurbished) Only 5,470 Total Arcs Count (Excellent! Condition) Sold
* This particular unit has sold, contact us to inquire about other Fujikura Fusion Splicer deals, Thank you!

Fujikura FSM-40S Optical Fiber Fusion Splicer w/ CT-20 Cleaver & More.

Includes: CT-20 Precision Cleaver, Origional Transit Case, Spare Electrodes, Shoulder Strap and CD Manual.

The FSM-40S delivers the benefits of PAS core alignment splicing in a field-friendly, highly portable, mini-splicer package.

Fujikura FSM-40S Splicer Features:

• Core-to-core fiber alignment system (PAS)
• Fast “15sec.” splicing & Full automatic operation
• Compact, lightweight and various power supply options
• 2 CCD cameras, No up-down mirror
• High resolution 5 inch color LCD monitor
• Simultaneous X & Y axes observation
• Automatic Arc calibration function for stable arc discharge
• Automatic fiber type identifier and self diagnostic test function

Reasons to buy your next Fujikura FSM-40S from BIZI!

1. One free Depot-Maintenance Cleaning within 1-Year of purchase. (New Only)
2. Fully trained in-house staff for pre and post fusion splicer support.
3. We service all Fujikura FSM-40, FSM-50 and FSM-60 fusion splicers world-wide.
4. Free Repair Evaluations! Send your Fujikura Fusion Splicer to our Service Center,
   We’ll provide you with a free fair cost estimate for any repairs, cleaning or calibration.

From the Manufacturer:
The FSM-40S Fusion Splicer delivers the benefits of PAS core alignment splicing in a field-friendly, highly portable, mini-splicer package. The new splicer features a 30% reduction in size, 38% reduction in weight, and a 42% increase in speed, compared to previous single fiber PAS splicer. Ergonomic improvements allow the FSM-40S Fusion Splicer to be used in difficult aerial taut-sheath splicing conditions, which require proper work flow and minimal fiber slack. The splicer has been designed for use in harsh, outdoor conditions and features an innovative wind protector, which allows splicing in 30 MPH cross winds.

This Fujikura FSM-40S Optical Fiber Fusion Splicer is in Excellent Condition, the pictures provided above are of the actual unit.

Call Today! 1-800-370-0123! or visit our Fujikura FSM-40S Fusion Splicer page at http://www.bizitestequipment.com/used-fujikura.html.

You may also leave us a comment on this post and a BIZI representative with contact you promptly.

Need a Cleaning, Service or Repair on your Fujikura FSM-40, FSM-50 or FSM-60? Visit our fusion splicer service and support page today!

Thanks for viewing this post!

Agilent 54845A – Infiniium 54800 Series 4-Channel Oscilloscope

BIZI Price: $7,495.00 – (Used / Refurbished) in Excellent Condition!

Agilent 54845A – Infiniium 54800 Series Oscilloscope
4 Channels, 1.5 GHz, up to 8 GSa/s.

The Agilent 54845A – 4-Channel Infiniium Series Oscilloscope provides the performance you need.

This Unit Includes the Following Accessories:

• 1 – Front Cover
• 1 – Top Soft Accessory Bag
• 1 – Original Manuals

From the Manufacturer:

The Infiniium family’s Agilent 54845A provides the performance you need for your most demanding signals. 1.5 GHz bandwidth and a sample rate of up to 8 GSa/s ensure fast, accurate capture of your wave forms. Like the other Infiniium models, the Agilent 54845A’s easy, familiar user interface makes it easy to take advantage of every bit of the performance inside.

Features:

• Simple, analog-like front panel with Windows® GUI
• USB Test option with embedded MatLab
• Time correlation between 16700 logic analyzer and scope
• Communications mask test kit option
• Voice Control option for hands free operation
• Web-enabled remote control from any web browser
• Email on trigger

This Agilent 54845A – Infiniium 54800 Series 4-Channel Oscilloscope is in Excellent Condition, the pictures provided above are of the actual unit.

Call Today! 1-800-370-0123! or visit our Agilent 54845A – Infiniium 54800 Series 4-Channel Oscilloscope product page on www.BiziTestEquipment.com.

You may also leave us a comment on this post and a BIZI representative with contact you promptly.

Looking for a different Agilent Oscilloscope model? Call or visit http://www.bizitestequipment.com.

Thanks for viewing this post and check back often!

The types of network analyzers deployed by organizations requiring this functionality are scalar network analyzers/ measurement systems, microwave test sets and measurement receivers, Z meters, and S-parameter measurement sets.

If you know your exact requirements, or if you need help defining what you need, call us @ 978-649-0722, or email us info@bizitestequipment.com

We stock all types of analyzers, to satisfy most needs.

Agilent E7495A – Wireless Base Station Test Set

BIZI Price: $6,495.00 – (Used / Refurbished) in Mint Condition!

Agilent E7495A – Wireless Base Station Test Set
Covers 10 MHz to 2.5 GHz spectrum.

The Agilent E7495A – Wireless Base Station Test Set is the most functional one-box tool for wireless and wireline tests.

This Unit Includes the Following Options:

• 200: CDMAOne/CDMA2000 Analyzer
• 210: CDMAOne/CDMA2000 OTA
• 220: Channel Scanner
• 510: CW & Complex Modulation Source
• 600: Power Meter

This Unit Includes the Following Accessories:

• 1 – 100 Watt Attenuator, DC-3 GHz (50FH-040-100-3N)
• 2 – Power Adapters
• 1 – Battery Charger
• 1 – Cigarette Lighter Power Adapter
• 1 – GPS Antenna
• 1 – Magnet Mount Mobile Cellular Antenna, 3 dB Gain, 824-894 MHz
• 1 – Power Sensor Cable (E9288B)
• 2 – RF Cables (8120-8862)
• 1 – RF Cable (08921-61010)
• 1 – Origional Manual
• 1 – Carry Bag (Not Origional but Very Nice)

From the Manufacturer:

The Agilent E7495A base station test set is the most functional one-box tool for wireless and wireline tests, eliminating the need for technicians to carry, manage, and learn multiple test tools. Consolidating your most frequently-used tools into one box dramatically increases your technicians’ productivity. This helps reduce your asset costs, tracking costs, calibration and maintenance costs, and training costs associated with learning the specifics of separate instruments.

Features:

• Antenna tester (one port insertion loss, two port insertion loss, return loss, and distance to fault measurements)
• Spectrum analyzer
• Internal GPS receiver
• Accessories (cables, attenuators, etc.)

This Agilent E7495A – Wireless Base Station Test Set is in Mint Condition, the pictures provided above are of the actual unit.

Call Today! 1-800-370-0123! or visit our Agilent E7495A – Wireless Base Station Test Set product page on www.BiziTestEquipment.com.

You may also leave us a comment on this post and a BIZI representative with contact you promptly.

Looking for a different Agilent Network Analyzer model? Call or visit http://www.bizitestequipment.com.

Thanks for viewing this post and check back often!